Michael McCune, a project designer at Trahan Architects, took advantage of a knee injury to show how 3D printing can be embraced.
Using the medical imaging software IsoSurf, McCune turned X-rays of his damaged knee into a study that would help with future design projects.
“It essentially takes a series of black-and-white images, stacks them and generates an interpolated three-dimensional surface from them,” he says. “This allows us to create extremely complex geometry through only a few custom images.
“The image slices of my knee allowed us to test and calibrate the brightness values and flexibility of the technique. By using just six images of my knee, we were able to isolate bone, muscle, veins and even skin into separate 3D models. We then 3D-printed a few of these studies to evaluate surface and spatial quality.”
The OBJET Eden350, which resembles a jet-black deep freezer, is being used to revolutionize the way architect Trey Trahan and his team approach new projects. The printer also is used to print actual bobbleheads of staff members, working crescent wrenches and the occasional, eerily detailed model of Marilyn Monroe’s face.
After all, what good is a 3D printer if it’s used purely for meaningful advances in a company’s field?
“The day we got [the printer], we looked at each other and laughed,” Trahan says. “There are so many challenges and different components [to building a model]. We then needed tools to evaluate [them], and we didn’t have that. It helps to see [the design] physically and be able to analyze it onsite.”
Though the technology has been around in its earliest form since the 1990s, 3D printing has only recently become more prominent. For Trahan and his company, it has made possible what was once impossible.
The Louisiana Sports Hall of Fame Museum, for instance, is one such project. In the past, an architect would have created a cast mold, which would have been used throughout the construction process. Thanks to the 3D technology, Trahan Architects created more than 1,000 molds for the Natchitoches facility.
The interior design of the museum, which boasts a fluidity like that of the contents of a lava lamp, is testimony to the utility of the technology being utilized by Trahan’s firm. If that design had been built using previous methods of cutting and gluing layer upon layer of cardboard or wood, it would have taken months to complete or been impossible altogether. Instead, it took hours.
Another impressive figure to consider is that museum construction typically costs $1,000 to $2,000 per square foot. With the help of the 3D printer, Trahan Architects is able to design the museum for $400 per square foot.
“The manpower it would have taken [to do the museum as it is designed], we would have never done it,” Trahan says. “[The printer] has really opened things for us. There’s almost nothing we can’t do.
“We felt paralyzed by the limitations of what we had. Now we’re able to take our abilities to another place.”
Because it has such a great tool at its disposal, Trahan’s firm is frequently asked by peers how to sell clients on the 3D design process. Trahan’s answer is that they don’t sell it.
“Once you think of it as selling it,” he says, “you’re doing it the wrong way.”
Instead of thrilling clients with the abilities of the OBJET Eden350, Trahan’s firm presents the results of its extensive research and details how that information ties into the work it plans to do.
In the end, Trahan says, that’s what draws clients in—not the use of a 3D printer.
“[Clients] see this as authenticity,” he says. “We sometimes end up knowing more about their community than they do. The buildings in a community, for instance, suggest something familiar to the community and the families there. The unfamiliar is intimidating.”
STEP BY STEP
How the OBJET Eden350 3D printer works:
1. A file containing the structure or model about to be printed is pulled up on a computer connected to the printer. The design undergoes a review to ensure that it’s watertight.
2. The model is exported as an STL, or stereolithography, file. This converts the surface of the structure to a triangulated mesh, ensuring that a lighter-sized file is sent to the printer.
3. Before the STL file is imported, it goes through a cost estimator to make sure the user knows how much it will cost to print the model or structure.
4. Objects sent to the printer are divided into hundreds of layers. When the file is sent to the printer’s job manager, it does so seven layers at a time.
5. The printer consists of eight print heads, with 70 nearly microscopic nozzles on each head. Four of the heads are devoted to spraying out model material, or resin, and the other four distribute waxy support material. The model material is laid down first, followed by the support material, which helps bond the model materials together.
6. After the materials are sprayed onto a 13-inch-by-13-inch surface, ultraviolet lights on both sides of the mechanism containing the printer heads pass over the developing model to dry the construction materials.
7. The mechanism then sweeps back over the object to scrape off 20% to 30% of the construction materials to ensure a smooth surface.
8. Once the object has finished printing, it is scraped off the surface and taken to a water blaster, where the support materials are washed away, resulting in a completed model or structure.
(Photos by Don Kadair)
